• Radio Shack Pro 62 Instruction Manual
• Radio Shack Manuals

2. It preserves the integrity of the content.

Radio Shack Pro 62 Instruction Manual

When a document with the extension .doc or .docx opens on a different computer or word processor, the information that has primarily been typed there may already be changed or tampered when the individual closes it. This bit boils down to the fact that such formats are incapable of protecting their contents from possible alterations.

However, a manuscript with .pdf after its name gets to keep every significant portion of the presentation from the font style down to the font size, style, and spacing. If someone wants to modify something on it, they can highlight the text or add a note near it, but they cannot directly type the changes in the document.

3. It is accessible for all.

Word processing platforms give the user a choice to save the file in different formats, and PDF is one of them. It entails you do not even have to save it in .doc before converting it to .pdf. It lets you utilize your time on other things.

43-3105

User’s Guide

Intercom System

0018

3

4

5

0018

Thank you for purchasing your Intercom System from
RadioShack. Please read this user’s guide before
installing, setting up, and using your new intercom
system.

CALL
Send a tone to stations

with the same channel.

LOCK
Constantly monitor

surroundings.

TALK
Hold down to speak

with other stations.

VOLUME/OFF
To turn on the station, rotate

the dial until it clicks. POWER

indicator lights red. Rotate to

adjust the volume.

A B C
Switch channels.

Package contents

• Intercom System (3)

• User’s Guide

• Quick Start

Features

• Three selectable channels allow you to communicate

with a specific intercom

• �ock button turns an intercom into a baby monitor

�ock button turns an intercom into a baby monitor

• �djustable volume control

�djustable volume control

• Call button sends a tone to alert other stations o�� an

Call button sends a tone to alert other stations o�� an
incoming transmission

• can be mounted to a wall

can be mounted to a wall

• �or indoor use only

�or indoor use only

1

Setting up

Connect to Power

Plug each station into an outlet and place it directly on a
desk, shel��, table or on a wall.

w

Important: Stations can transmit up to 300 feet and

between buildings as long as they are connected to the
same power line transformer.

n

Note: �ake sure you install the stations at least �0

�ake sure you install the stations at least �0

feet away from each other. Placing the stations too close
together produces feedback and creates a squealing sound.

Mounting

To mount a station on the wall, you need two screws (not
supplied) with heads that fit into the keyhole slots on the
bottom o�� the stations.

1. Select a location ��or the station. Mark the mounting

screw locations on the wall 2

9

/

16

in. (64.8 mm) apart,

one above the other.

0018. Drill holes at the marked locations.
3. Thread a screw into each hole allowing the screw

heads to extend
about

1

/

8

in. (3 mm)

��rom the wall.

4. �lign the keyhole slots

on the bottom o�� the
station with the screw
heads in the wall.
Slide the station down
onto the screws to
secure the station.

2

Communicating

Setting the Channel

Each station has three channels, so you can select which
station or stations will communicate. You can also use a
station to monitor sounds near another station.

�or example, you could set a station installed in the
kitchen to Channel �, a station installed in the ��amily
room to Channel B, and a station installed in a bedroom
to Channel C. Using the station in the kitchen, you can
communicate with the station in the ��amily room by
setting the channel selector to B, or with the station in
the bedroom by setting the channel selector to C.

Set the channel switch on each station as follows:

• I�� you want all the stations to communicate with each

other, set all stations to the same channel.

• I�� you want to use a station to communicate with only

one other station, set only two stations to the same
channel.

Turning a Station On

Rotate VOLUME counterclockwise until it clicks. Then
adjust VOLUME to a com��ortable listening level. To turn
o����, rotate VOLUME clockwise until it clicks.

Calling Another Station

Radio Shack Manuals

Be sure the stations you plan to use are turned on and
adjusted to the desired volume level.

1. Set the channel selector to the channel (�, B, or C) o��

the station(s) you are calling.

0018. Press CALL. Each station that is on and set to the

selected channel sounds a tone.

3. Hold down TALK and speak. When you finish

speaking, release TALK and listen ��or a response.

n

Notes:

• Only one party can talk on a channel at a time.
• The TALK indicator on the station you are using

remains lit as long as you hold down TALK or CALL,
or when you press LOCK.

• If your voice sounds distorted, you might be speaking

too loudly or too close to the microphone.

• Set the channel selector back to your designated

channel after you finish talking, so others can easily
reach you.

3

Monitoring

You can set any station so it continuously transmits
sounds to another station.

n 2013 toyota corolla user manual.

Note: You can monitor only one station at a time.

1. Press LOCK on the station in the area you want to

monitor. The TALK indicator lights.

n

Note: The

The TALK indicator stays lit until you press

CALL or TALK. This lets you know that the station is
transmitting.

0018. Set the channel selectors on both stations to the

same channel.

Indicator
�ights red when

you press TALK,

CALL, or LOCK.