May 27, 2018  The Programmable Rain Delay feature incorporates a user-specified number of days to keep the controller in the OFF mode, then allows for the system to automatically revert back to scheduled irrigation. Outdoor controller,Hunter XC Hybrid series outdoor controllers,Hunter XC Hybrid sprinkler controller,Hunter XC Hybrid sprinkler system. Selecting interval watering, Setting event day(s) off, Automatic watering – Hunter XC User Manual Page 13: System off, Programmable rain off, Programming the controller. Jun 16, 2010  Manual Operation with a Hunter Controller - Quick Tip Hunter Irrigation. How to Winterize a Sprinkler System - Blow Out Method - Duration. Hunter Irrigation 958,377 views.

• Hunter Xc Sprinkler System Owner's Manual
• Hunter Xc Sprinkler System Troubleshooting
• Hunter Xc Sprinkler System
• Hunter X Core Watering System Manual

Page 13: System off, Programmable rain off, Programming the controller

ENG

10

Automatic Watering

After programming the XC, set the dial to the

Hunter Xc Sprinkler System Owner's Manual

run position to enable automatic execution of all

selected watering programs and start times.

System Off

Valves currently watering will be shut off after

the dial is turned to the sysTem off position

for two seconds. All active programs are dis-

continued and watering is stopped. To return

the controller to normal automatic operation,

simply return the dial to the run position.

Programmable Rain Off

This feature permits the user to stop all

programmed waterings for a designated

period from 1 to 7 days. At the end of the

programmed rain off period, the controller

will resume normal automatic operation.
1. Turn the dial to the sysTem off

position. Wait for off to be displayed.

2. Press the button as many times as needed

to set the number of days off (up to 7 days).

3. Turn the dial back to the run position at which

off, a number, the

and

icons will be

displayed.

The days off remaining will decrease at

midnight each day. When it goes to zero,

the display will show normal time of day

and normal irrigation will resume at the

next scheduled start time.

Selecting Interval Watering

With this option you can select interval

watering from 1 to 31 days.
1. With the cursor on eVen, press the

button once and

the

icon will appear and a 1 flashing in the display.

Interval watering schedule appears on the display.

2. Press the or button to select the number of days

between watering days (from 1 to 31 days). This is called the

interval.

The controller will water the selected program at the next start

time and will then water at the interval programmed.

Setting Event Day(s) Off

The XC allows you to program a No Water Day(s). This feature is

useful to inhibit watering on specific day(s). For example, if you

always mow the lawn on Saturdays, you would designate Saturday

as a no Water day so that you are not mowing wet grass.
1. Turn the dial to the WaTer days position.
2. Enter an interval watering schedule as described on page 10.
3. Press the button to scroll to the no WaTer days at the

bottom of the display. mo will be flashing.

4. Use the button until the cursor is at the day of the week

Manual 270962 for free. .Also Fits ModelBRIGGS & STRATTONCovers all single cylinder side valve engines to dateBRIGGS AND STRATTON091202; 091212; 091232; 091252; 091412; 092202; 092212; 092232; 099252; 093302; 093312; 093332; 093352; 093412; 093432 & other modelsReplaces OEM N/A.

you wish to set as a No Water Day.

5. Press the button to set this day as a no water day. The

will illuminate over this day.

6. Repeat steps 4 and 5 until all desired event day(s) are off.

NOTE: You also have the option in the interval

watering schedule to program Odd or Even days

off.

programmIng THe ConTroller

SYSTEM OFF

RUN

RUN

SYSTEM OFF

26

TroUblEsHooTING GUIDE

problem

Causes

solutions

Display shows a station is running but

the and icons are flashing

The sensor is interrupting irrigation,

however the station has been

programmed to override the sensor

Check the sensor override status (see page 23)

Automatic irrigation does not start at

the start time and controller is not in the

System Off mode

• AM/PM of time of day not set correctly
• AM/PM of start time not set correctly
• Start Time is disabled (set for Off)
• Controller is not receiving AC power

Hunter Xc Sprinkler System Troubleshooting

• Correct AM/PM of time of day
• Correct AM/PM of start time
• See Setting Program Start Times (see page 18)
• Check AC power connections

The display shows dashes when the dial

is in the Solar Sync Settings position

• The Solar Sync sensor is not

connected to the controller

• The Solar Sync sensor wires may have

a break in them or a bad connection

Connect the Solar Sync to the “SEN” positions on the

wiring terminal. The display will then show the Region

Hunter Xc Sprinkler System

and Water Adjustment setting.

Run times for a particular station are

too short/too long when using a Solar

Sync sensor

Hunter X Core Watering System Manual

Program Run Time too long/short

Solar Sync provides a global seasonal adjustment to the

controller. If a particular station has run times too long

or too short, make the appropriate adjustment to the

program in the controller. Make sure to change seasonal

adjust back to 100% before making changes to program

run times. Do this by turning the dial to the Seasonal

Adjust position and increasing/decreasing the value

to 100%.

Seasonal Adjust seems low

• Region too high
• Water Adjustment too low
• Location of Sensor does not allow for

full sun

Increase the value on the Water Adjustment scale

(the default setting is 5). If you max out on the Water

Adjustment scale at 10 and still require more seasonal

adjustment, move down one Region (from 4 to 3, for

example) and start at Water Adjustment setting 5. Solar

Sync will immediately update the Seasonal Adjust on the

controller. If it is still too high, repeat the adjustment until

the desired seasonal adjust is showing on the controller.