Behringer Ultralink Pro Mx882 User Manual
Jul 19, 2014 Behringer MX882 8-Channel Splitter/Mixer. Behringer MX882 ULTRALINK PRO, its compact signal distribution wizard has helped countless musicians and engineers solve diverse problems, whether as a splitter, line mixer or level conditioner. Be sure to grab the user manual before purchasing. Make sure it can do what you need it to. ULTRALINK PRO MX882. With the BALANCE/PAN control you can set the balance between the left and right main signals. SPLIT mode, the main input signal is routed to the mono output, with the BALANCE control determining. The balance beween the left and right main signal portions.
9
ULTRALINK PRO MX882
4. CONTROL ELEMENTS Magic bullet model mb1001 manual.
Fig. 4.1: ULTRALINK PRO front panel
The BEHRINGER ULTRALINK PRO has six identical channels. Each channel is equipped with two rotary
controls, one button and eight LEDs. Moreover there is a main section with two rotary controls, one button and
eight LEDs.
4.1 The front panel control elements
Fig. 4.2: Control elements on the front panel
1
The MAIN INPUT LEVEL control sets the main input gain, before the signal reaches the input bus. In
SPLIT mode, the MAIN INPUT LEVEL control determines the common output level for all mono outputs.
2
The 4-digit INPUT LEVEL meter informs you about the input level of the main input within a range from
-24 to +6 dB.
3
By depressing the MAIN LINK switch you can route the MAIN INPUT signal to the MAIN OUT. This way
it is possible to route a maximum of eight input channels to the main mix.
4
The MAIN OUTPUT LEVEL control adjusts the output level applied to the main outputs. The levels
present at the six mono outputs are not affected. Summing the signal levels of several mono channels
can overload the main output stage. The MAIN OUTPUT LEVEL control is therefore used to adjust the
overall output level.
5
The 4-digit OUTPUT LEVEL meter informs you about the output level of the main input within a range
from -24 to +6 dB.
6
This SPLIT/MIX switch sets the respective channel to SPLITTER or MIXER mode.
7
The LEVEL control determines the signal level of the individual channels. In SPLIT mode, the LEVEL
control sets the output level of the mono channels. In MIX mode, however, it controls the amount of the
mono channel's input signal feeding into the main output section; at the same time, the level of the mono
channel can be determined, whichowing to the maximum gain of +15 dBallows for converting, e.g.,
home recording levels (-10 dBV) into studio levels (+4 dBu).
8
The 8-digit OUTPUT LEVEL meter informs you about the output level of each channel within a range
Behringer Ultralink Pro Mx882 V2 Manual
from -24 to +18 dB.
4. CONTROL ELEMENTS
10
ULTRALINK PRO MX882
9
With the BALANCE/PAN control you can set the balance between the left and right main signals. In
SPLIT mode, the main input signal is routed to the mono output, with the BALANCE control determining
the balance beween the left and right main signal portions. In MIX mode, the mono inputs are mixed and
routed via the LEVEL control to the main outputs, with the PAN controls determining the allocation of
the mono inputs to the left and right main outputs.
4.2 The rear panel elements
Fig. 4.3: Rear panel elements
10
FUSE HOLDER / VOLTAGE SELECTOR. Please make sure that your local voltage matches the
voltage indicated on the unit, before you attempt to connect and operate the ULTRALINK PRO. Blown
fuses may only be replaced by fuses of the same type and rating.
11
MAINS CONNECTION. Use the enclosed power cord to connect the unit to the mains. Please also note
Behringer Mx882 Manual
the instructions given in chapter 3 INSTALLATION .
12
MAIN INPUTS. These are the main audio inputs of your ULTRALINK PRO, available as balanced XLR
connectors. They may feed the mono outputs of all channels which are operated in SPLIT mode.
13
Call today 800.333.9111 Over 30 YEARS OF EXPERIENCE. Operator’s Manual. QRS Detection and Analysis: Automatic or manual lead selection Operating system: Windows 2000 Server; Windows 2003 Server.22 Jul 1998 Series 2000 Treadmill specifications in this manual are subject to elevation from 0% to 25% using controlling unit(MAX-1, CASE 15, etc.)15 Aug 2007 The information in this manual only applies to the T-2100 Treadmill. GE CASE Stress Systems Standalone Stress GE treadmill,? Ge cardiosoft 6.7 user manual. CardioSoft, MAC and CASE are trademarks owned by GE MedicalNeed service manual for GE marquette Case stress Test system My sterilizing autoclave, SES 2000 Little Sister has flashed with error ELECT on the screen,8 Sep 2009 CASE™.
MAIN OUTPUTS. These are the main outputs, available as balanced XLR connectors. They may be fed
either by the left and right main inputs or by any of the six mono inputs (or a combination of both).
14
MONO INPUTS (channel 1 to 4). These are the mono inputs. Connection takes place via balanced XLR
connectors.
15
MONO OUTPUTS (channel 1 to 4). These are the mono outputs, available as balanced XLR connectors.
16
MONO INPUTS (channel 5 to 6). These are the mono inputs. Connection takes place via balanced
phone jacks.
17
MONO OUTPUTS (channel 5 to 6). These are the mono outputs, available as balanced phone jacks.
+
Please take the time to fill in and return the warranty card within 14 days after the date of
purchase, so as to benefit from our extended warranty. Or use our online registration option
available on the World Wide Web at www.behringer.com.
4. CONTROL ELEMENTS